dmesg - Intel Core i5-6200U
microcode: microcode updated early to revision 0xba, date = 2017-04-09
Linux version 4.12.9 (root@CSIBU4) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Sat Aug 26 17:00:26 CEST 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b051efff] usable
BIOS-e820: [mem 0x00000000b051f000-0x00000000b051ffff] ACPI NVS
BIOS-e820: [mem 0x00000000b0520000-0x00000000b0549fff] reserved
BIOS-e820: [mem 0x00000000b054a000-0x00000000b05f9fff] usable
BIOS-e820: [mem 0x00000000b05fa000-0x00000000b0ef9fff] ACPI NVS
BIOS-e820: [mem 0x00000000b0efa000-0x00000000b0f0dfff] usable
BIOS-e820: [mem 0x00000000b0f0e000-0x00000000b0f0efff] reserved
BIOS-e820: [mem 0x00000000b0f0f000-0x00000000c710efff] usable
BIOS-e820: [mem 0x00000000c710f000-0x00000000c730efff] type 20
BIOS-e820: [mem 0x00000000c730f000-0x00000000c7d7efff] reserved
BIOS-e820: [mem 0x00000000c7d7f000-0x00000000c7f7efff] ACPI NVS
BIOS-e820: [mem 0x00000000c7f7f000-0x00000000c7ffefff] ACPI data
BIOS-e820: [mem 0x00000000c7fff000-0x00000000c7ffffff] usable
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffaa0000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004337fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by INSYDE Corp.
efi: SMBIOS=0xc73fc000 ESRT=0xc747d918 ACPI 2.0=0xc7ffe014
SMBIOS 2.8 present.
DMI: FUJITSU LIFEBOOK E736/FJNB293, BIOS Version 1.21 09/05/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x433800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 0080000000 mask 7FC0000000 write-back
2 base 00C0000000 mask 7FF8000000 write-back
3 base 00FF000000 mask 7FFF000000 write-protect
4 base 0100000000 mask 7F00000000 write-back
5 base 0200000000 mask 7E00000000 write-back
6 base 0400000000 mask 7FC0000000 write-back
7 base 0433800000 mask 7FFF800000 uncachable
8 base 0434000000 mask 7FFC000000 uncachable
9 base 0438000000 mask 7FF8000000 uncachable
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xc8000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000c747d918 to 0x00000000c747d978.
Base memory trampoline at [ffff95c4c002e000] 2e000 size 24576
Using GB pages for direct mapping
BRK [0x2ee953000, 0x2ee953fff] PGTABLE
BRK [0x2ee954000, 0x2ee954fff] PGTABLE
BRK [0x2ee955000, 0x2ee955fff] PGTABLE
BRK [0x2ee956000, 0x2ee956fff] PGTABLE
BRK [0x2ee957000, 0x2ee957fff] PGTABLE
BRK [0x2ee958000, 0x2ee958fff] PGTABLE
BRK [0x2ee959000, 0x2ee959fff] PGTABLE
BRK [0x2ee95a000, 0x2ee95afff] PGTABLE
BRK [0x2ee95b000, 0x2ee95bfff] PGTABLE
BRK [0x2ee95c000, 0x2ee95cfff] PGTABLE
BRK [0x2ee95d000, 0x2ee95dfff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x355c7000-0x36adafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000C7FFE014 000024 (v02 FUJ )
ACPI: XSDT 0x00000000C7FFE120 0000C4 (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: FACP 0x00000000C7FEF000 0000F4 (v05 FUJ PC 01150000 FUJ 00000001)
ACPI: DSDT 0x00000000C7FCA000 01F799 (v02 FUJ FJNB293 01150000 FUJ 00000001)
ACPI: FACS 0x00000000C7F7B000 000040
ACPI: UEFI 0x00000000C7FFD000 000236 (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: UEFI 0x00000000C7FFC000 000042 (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: FOAT 0x00000000C7FFB000 000055 (v03 FUJ PC 01150000 FUJ 00000001)
ACPI: SSDT 0x00000000C7FF5000 0051DB (v02 SaSsdt SaSsdt 00003000 INTL 20130117)
ACPI: SSDT 0x00000000C7FF4000 0000DA (v02 FUJ DockSsdt 00000001 INTL 20130117)
ACPI: DBGP 0x00000000C7FF3000 000034 (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: DBG2 0x00000000C7FF2000 000061 (v00 FUJ PC 01150000 FUJ 00000001)
ACPI: ASF! 0x00000000C7FF1000 0000A5 (v32 FUJ PC 01150000 FUJ 00000001)
ACPI: ASPT 0x00000000C7FF0000 000034 (v07 FUJ PC 01150000 FUJ 00000001)
ACPI: HPET 0x00000000C7FEE000 000038 (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: LPIT 0x00000000C7FED000 000094 (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: APIC 0x00000000C7FEC000 0000BC (v03 FUJ PC 01150000 FUJ 00000001)
ACPI: MCFG 0x00000000C7FEB000 00003C (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: SSDT 0x00000000C7FC9000 0002D4 (v01 INSYDE H2O BIOS 00000000 ACPI 00040000)
ACPI: SSDT 0x00000000C7FC8000 000B49 (v02 INSYDE H2O BIOS 00001000 ACPI 00040000)
ACPI: SSDT 0x00000000C7FC7000 000F09 (v02 CpuRef CpuSsdt 00003000 INTL 20130117)
ACPI: DMAR 0x00000000C7FC6000 0000A8 (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: FPDT 0x00000000C7FC5000 000044 (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: BGRT 0x00000000C7FEA000 000038 (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000004337fffff]
NODE_DATA(0) allocated [mem 0x4337fb000-0x4337fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004337fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x0000000000087fff]
node 0: [mem 0x0000000000100000-0x00000000b051efff]
node 0: [mem 0x00000000b054a000-0x00000000b05f9fff]
node 0: [mem 0x00000000b0efa000-0x00000000b0f0dfff]
node 0: [mem 0x00000000b0f0f000-0x00000000c710efff]
node 0: [mem 0x00000000c7fff000-0x00000000c7ffffff]
node 0: [mem 0x0000000100000000-0x00000004337fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004337fffff]
On node 0 totalpages: 4169578
DMA zone: 64 pages used for memmap
DMA zone: 96 pages reserved
DMA zone: 3974 pages, LIFO batch:0
DMA32 zone: 12640 pages used for memmap
DMA32 zone: 808932 pages, LIFO batch:31
Normal zone: 52448 pages used for memmap
Normal zone: 3356672 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000c9800000-0x00000000cb7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x00088000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb051f000-0xb051ffff]
PM: Registered nosave memory: [mem 0xb0520000-0xb0549fff]
PM: Registered nosave memory: [mem 0xb05fa000-0xb0ef9fff]
PM: Registered nosave memory: [mem 0xb0f0e000-0xb0f0efff]
PM: Registered nosave memory: [mem 0xc710f000-0xc730efff]
PM: Registered nosave memory: [mem 0xc730f000-0xc7d7efff]
PM: Registered nosave memory: [mem 0xc7d7f000-0xc7f7efff]
PM: Registered nosave memory: [mem 0xc7f7f000-0xc7ffefff]
PM: Registered nosave memory: [mem 0xc8000000-0xc97fffff]
PM: Registered nosave memory: [mem 0xc9800000-0xcb7fffff]
PM: Registered nosave memory: [mem 0xcb800000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffa9ffff]
PM: Registered nosave memory: [mem 0xffaa0000-0xffffffff]
e820: [mem 0xcb800000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 37 pages/cpu @ffff95c8f3400000 s113752 r8192 d29608 u524288
pcpu-alloc: s113752 r8192 d29608 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4104330
Policy zone: Normal
log_buf_len individual max cpu contribution: 131072 bytes
log_buf_len total cpu_extra contributions: 393216 bytes
log_buf_len min size: 131072 bytes
log_buf_len: 524288 bytes
early log buf free: 116548(88%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16110536K/16678312K available (6443K kernel code, 1153K rwdata, 2880K rodata, 1472K init, 688K bss, 567776K reserved, 0K cma-reserved)
ftrace: allocating 28338 entries in 111 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2400.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 8 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000c7c7b000 end: 0x000000c7c9afff
DMAR: RMRR base: 0x000000c9000000 end: 0x000000cb7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19201.50 BogoMIPS)
sched_clock: Marking stable (610000000, 0)->(609862221, 137779)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xb051f000-0xb051ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xb05fa000-0xb0ef9fff] (9437184 bytes)
PM: Registering ACPI NVS region [mem 0xc7d7f000-0xc7f7efff] (2097152 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 17 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C8E0510800 00048C (v02 FUJ Win8Ssdt 00000001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C8E0510000 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20130117)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C8E0511800 0003C8 (v02 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C8E0497000 0005AA (v02 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C8E0AF0800 000119 (v02 PmRef ApCst 00003000 INTL 20130117)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x22, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xcb800000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe124a000-0xe124afff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xe1248000-0xe1249fff]
pci 0000:00:17.0: reg 0x14: [mem 0xe124d000-0xe124d0ff]
pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:17.0: reg 0x1c: [io 0x3088-0x308b]
pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:17.0: reg 0x24: [mem 0xe124b000-0xe124b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xe1244000-0xe1247fff]
pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xe1240000-0xe1243fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xe1230000-0xe123ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xe124c000-0xe124c0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1101fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff]
pci 0000:03:00.0: [1217:8621] type 00 class 0x080501
pci 0000:03:00.0: reg 0x10: [mem 0xe1001000-0xe1001fff]
pci 0000:03:00.0: reg 0x14: [mem 0xe1000000-0xe10007ff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xe1000000-0xe10fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x22, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0xb051f000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb05fa000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb0f0e000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xc710f000-0xc7ffffff]
e820: reserve RAM buffer [mem 0x433800000-0x433ffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0xf800-0xf87f] has been reserved
system 00:01: [io 0xf880-0xf8ff] has been reserved
system 00:01: [io 0xfc00-0xfc7f] has been reserved
system 00:01: [io 0xfc80-0xfcff] has been reserved
system 00:01: [io 0xfd00-0xfd7f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x2000-0x207f] has been reserved
system 00:01: [io 0x2080-0x20ff] has been reserved
system 00:01: [io 0x0600-0x0603] has been reserved
system 00:01: [io 0x0604-0x0607] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs FUJ0300 PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN1f08 PNP0f13 (active)
system 00:06: [mem 0xfe030000-0xfe030fff] has been reserved
system 00:06: [mem 0xfe031000-0xfe031fff] has been reserved
system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xcb800000-0xcb81ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xe1000000-0xe10fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xcb800000-0xefffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff]
pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe10fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 21584K
DMAR: No ATSR found
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:02.0 [0xc9000000 - 0xcb7fffff]
DMAR: Setting identity map for device 0000:00:14.0 [0xc7c7b000 - 0xc7c9afff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:14.0 to group 2
iommu: Adding device 0000:00:16.0 to group 3
iommu: Adding device 0000:00:17.0 to group 4
iommu: Adding device 0000:00:1c.0 to group 5
iommu: Adding device 0000:00:1c.3 to group 5
iommu: Adding device 0000:00:1c.4 to group 5
iommu: Adding device 0000:00:1f.0 to group 6
iommu: Adding device 0000:00:1f.2 to group 6
iommu: Adding device 0000:00:1f.3 to group 6
iommu: Adding device 0000:00:1f.4 to group 6
iommu: Adding device 0000:00:1f.6 to group 6
iommu: Adding device 0000:02:00.0 to group 5
iommu: Adding device 0000:03:00.0 to group 5
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x7e9000 bytes, mapped to 0xffffaea502000000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
Console: switching to colour frame buffer device 240x67
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1503807943.359:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
pcieport 0000:00:1c.3: AER enabled with IRQ 123
pcieport 0000:00:1c.4: AER enabled with IRQ 124
pcieport 0000:00:1c.0: Signaling PME with IRQ 122
pcieport 0000:00:1c.3: Signaling PME with IRQ 123
pcieport 0000:00:1c.4: Signaling PME with IRQ 124
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x4E
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: sig=0x406e3, pf=0x80, revision=0xba
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
rtc_cmos 00:02: setting system clock to 2017-08-27 04:25:43 UTC (1503807943)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1472K
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1736K
Freeing unused kernel memory: 1216K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
fjes: module verification failed: signature and/or required key missing - tainting kernel
hidraw: raw HID events driver (C) Jiri Kosina
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.9 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
sdhci-pci 0000:03:00.0: SDHCI controller found [1217:8621] (rev 1)
mmc0: Unknown controller version (3). You may experience problems.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.9 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
random: fast init done
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq ilck stag pm led clo only pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xe124b000 port 0xe124b100 irq 126
ata2: SATA max UDMA/133 abar m2048@0xe124b000 port 0xe124b180 irq 126
ata3: SATA max UDMA/133 abar m2048@0xe124b000 port 0xe124b200 irq 126
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
random: crng init done
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM01B6Q, max UDMA/133
ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c4:7d:46:20:5b:b9
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: An interrupt is pending!
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
DMAR: DRHD: handling fault status reg 3
ata2.00: ATAPI: TSSTcorp CDDVDW SU-208HB, FU01, max UDMA/100
DMAR: [DMA Write] Request device [00:17.0] fault addr fff9d000 [fault reason 12] non-zero reserved fields in PTE
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
DMAR: DRHD: handling fault status reg 2
ata2.00: configured for UDMA/100
DMAR: [DMA Write] Request device [00:17.0] fault addr fff9d000 [fault reason 12] non-zero reserved fields in PTE
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208HB FU01 PQ: 0 ANSI: 5
clocksource: Switched to clocksource tsc
ata3: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
raid6: sse2x1 gen() 8754 MB/s
raid6: sse2x1 xor() 6820 MB/s
psmouse serio2: synaptics: queried max coordinates: x [..5680], y [..4730]
raid6: sse2x2 gen() 11877 MB/s
psmouse serio2: synaptics: queried min coordinates: x [1354..], y [1280..]
psmouse serio2: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x126800/0x0, board id: 2720, fw id: 1450125
psmouse serio2: synaptics: serio: Synaptics pass-through port at isa0060/serio2/input0
raid6: sse2x2 xor() 8314 MB/s
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
raid6: sse2x4 gen() 13623 MB/s
raid6: sse2x4 xor() 9477 MB/s
raid6: avx2x1 gen() 19624 MB/s
raid6: avx2x1 xor() 13371 MB/s
raid6: avx2x2 gen() 22145 MB/s
raid6: avx2x2 xor() 15662 MB/s
raid6: avx2x4 gen() 24938 MB/s
raid6: avx2x4 xor() 17939 MB/s
raid6: using algorithm avx2x4 gen() 24938 MB/s
raid6: .... xor() 17939 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
PM: Starting manual resume from disk
PM: Hibernation image partition 8:3 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
EXT4-fs (sda2): re-mounted. Opts: discard,errors=remount-ro
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[234]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC Adapter [AC] (off-line)
input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input15
fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
fujitsu_laptop: BTNI: [0x1010001]
fujitsu_laptop: driver 0.6.0 successfully loaded
ACPI: Battery Slot [CMB1] (battery present)
ACPI: Battery Slot [CMB2] (battery absent)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input16
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input17
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input18
ACPI: Lid Switch [LID]
wmi: Mapper loaded
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
iTCO_vendor_support: vendor-support=0
EFI Variables Facility v0.08 2004-May-17
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: PC Speaker as /devices/platform/pcspkr/input/input19
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
[drm] Memory usable by graphics device = 4096M
[drm] VT-d active for gfx access
checking generic (d0000000 7e9000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from simple
Console: switching to colour dummy device 80x25
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-30.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-29.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-28.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-27.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2
[drm] Replacing VGA console driver
iwlwifi 0000:02:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
pstore: using zlib compression
Error: Driver 'pcspkr' is already registered, aborting...
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
Adding 16677884k swap on /dev/sda3. Priority:-1 extents:1 across:16677884k SSFS
pstore: Registered efi as persistent store backend
[drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: inteldrmfb (fb0) is primary device
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_codec_realtek hdaudioC0D0: ALC255: SKU not ready 0x909701f0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
alg: No test for pcbc(aes) (pcbc-aes-aesni)
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone1: failed to read out thermal zone (-5)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2399999867 Hz
vboxdrv: Successfully loaded version 5.1.26 (interface 0x002a0000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU found
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[drm] RC6 on
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 04:f0:21:1c:b8:a3
wlp2s0: send auth to 04:f0:21:1c:b8:a3 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 04:f0:21:1c:b8:a3 (try 1/3)
wlp2s0: RX AssocResp from 04:f0:21:1c:b8:a3 (capab=0x11 status=0 aid=1)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
ACPI : button: The lid device is not compliant to SW_LID.
usb 1-1: new full-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=1ea7, idProduct=0064
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: 2.4G Mouse
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver usbmouse
input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1EA7:0064.0001/input/input30
hid-generic 0003:1EA7:0064.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:14.0-1/input0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
fuse init (API version 7.26)
usb 1-3: new high-speed USB device number 3 using xhci_hcd
usb 1-3: New USB device found, idVendor=0951, idProduct=1607
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: DataTraveler 2.0
usb 1-3: Manufacturer: Kingston
usb 1-3: SerialNumber: 001372982BA9F9A1961D0CB8
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi host3: usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 31272544 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page found
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI removable disk
usb 1-3: USB disconnect, device number 3
usb 1-3: new high-speed USB device number 4 using xhci_hcd
usb 1-3: New USB device found, idVendor=0e8d, idProduct=2008
usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-3: Product: T5S
usb 1-3: Manufacturer: MediaTek
usb 1-3: SerialNumber: OZ59D6SWKNHIDIEU
usb 1-3: USB disconnect, device number 4
usb 1-3: new high-speed USB device number 5 using xhci_hcd
usb 1-3: New USB device found, idVendor=0e8d, idProduct=2008
usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-3: Product: T5S
usb 1-3: Manufacturer: MediaTek
usb 1-3: SerialNumber: OZ59D6SWKNHIDIEU
usb 1-3: reset high-speed USB device number 5 using xhci_hcd
usb 1-3: USB disconnect, device number 5
wlp2s0: authenticate with 04:f0:21:1c:b8:a3
wlp2s0: send auth to 04:f0:21:1c:b8:a3 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 04:f0:21:1c:b8:a3 (try 1/3)
wlp2s0: RX AssocResp from 04:f0:21:1c:b8:a3 (capab=0x11 status=0 aid=1)
wlp2s0: associated
systemd[1]: anacron.timer: Adding 3min 1.804551s random time.
systemd[1]: anacron.timer: Adding 3min 59.799171s random time.